My Cart
800 955 2879
Accessibility Accessibility


Adjust-A-Gate™ Wide Steel Frame Gate Building Kit 36”-72” Consumer Series

In stock
  • ANTI-SAG GATE KIT: This gate hardware kit has a patented truss cable system that keeps your gate from sagging or dragging. Use it to fix an existing gate or build a new gate up to 72" wide
  • EASY TO INSTALL: The Adjust-A-Gate building kit is installed on-site to perfectly fit your gate opening every time. Just add wood or composite to match your fence
  • RUST RESISTANT: Even in wet weather from a two-stage, powder-coated steel frame
  • KIT INCLUDES: Vertical frame, spreader bars, frame hinges, post hinges, standard gate latch kit, truss cable and screws
  • DIMENSIONS: 48''H x 36''-72''W

Adjust-A-Gate Assembly Instructions

More Information

More Information
Size 36''-72''
Special Price $85.49 Regular Price $94.99

Build a fence gate, like a pro!


Ready-to-install with adjustable widths to avoid re-measuring, re-cutting, and re-working


Stays square with patented sag-free and drag-free design


Compatible with wood and composite boards; and wood, composite, and steel posts


Repair Existing Gates: Have an old sagging gate? The Adjust-A-Gate steel gate frame kit is the perfect solution for straightening and strengthening your old gate.

Adjustable: Telescoping bars to fit gate openings from 36" wide up to 72" wide. No cutting required!

Drive-Through Double Gate: Purchase 2 kits and a UL301 Drop Rod kit for building a double gate drive through up to 11'11'' wide.

AG72 Installation Video Step By Step

  • Video Transcript

    Find the post center line and measure sixteen inches up and down from your center line mark. With a half inch bit, drill the hole, then screw in your hinges, leaving a one inch gap.

    First, loosely install “U” brackets. Set the gate arm in place on the lower hinge and tighten the lower “U” bracket. Slide the upper “U” bracket in place and tighten that too. Insert a crossbar into the gate arm, repeat with the second crossbar at the bottom. Loosely insert the latch side gate arm and expand until there's a one inch gap. Measure, cut and place your top rail into the flanges. Locate a pre-drilled hole on the underside of the upper crossbar and secure. Finally, tap a small hole in the crossbar, underside near the hinge side. Finish the top rail mounting with a wood screw. Use the same process on the bottom rail, remembering to tap a hole on the hinge side with a small drill bit. Add a second screw through the pre-drilled hole on the latch side and put a third screw on the hinge side. Finish by securing the rails with the outside screws. On the opposite post, mount your latch receiver at 54 inches. Send her the striker plate with the receiver and secure with two self-tapping screws through the pre-drilled holes. First, loosen the turnbuckle until just a few threads are exposed on each end. Locate the pre-drilled hole on the upper inside corner of your gate. Insert the hook of the turnbuckle. On the opposite lower corner, build a loop by sliding the cable end into the cable clamp full slack and reinsert the cable end to create a one inch loop. Insert the hook into the pre-drilled hole, then attach the cable loop and tighten clamp. Last, trim off the excess cable. Set a level on the top rail, then tension the cables turnbuckle to raise or lower. Add the fence pickets and you're done. Simple as that. For questions or customer service, call Jewett Cameron at 800-955-2879 and our team will be happy to help.

Free Shipping

Easy Returns

Lifetime Warranty

Product Overview

The DIY answer for new build or even better, replacing those tired, sagging wood frame gates. Our AG72 Adjust-A-Gate gives you pro-level, steel telescopic framing in a lightweight, easy-to-transport complete kit. So simple to install, it’ll put an end to frustration, the throwing of tape measures and the creative vocabulary too often associated with home gate building projects. 
The main features of the gate frame kit include:
  • Built on-site to fit your gate opening perfectly - Works for wood or composite fencing, 2 rail or privacy fence
  • Contractor quality, DIY friendly - Comprehensive easy to understand illustrated instructions included
This is the perfect gate building kit for homeowners and contractors alike. Over ONE Million Installed, Internationally. Simply the Best Gate Frame Available.
About Adjust-A-Gate: One of the biggest headaches of building a fence is getting the gate right. Adjust-A-Gate is your no-nonsense solution to all your gate frame woes. Stay on-time and on-budget with our reliable and versatile gate frame system. The premier gate frame kit on the market, Adjust-A-Gate is a straight-forward, lifelong solution, easy enough for homeowners but with superior quality that meets the demands of the professional contractor. Building your gate on-site eliminates measurement issues, so you get the right gate the first time, every time. We support wood, vinyl, and composite materials as well as ranch style fences, so you'll have an easy time finding the right design for you. Whether you are a professional contractor or do-it-yourself enthusiast, Adjust-A-Gate is the right solution for you.


Write Your Own Review
You're reviewing:Adjust-A-Gate™ Wide Steel Frame Gate Building Kit 36”-72” Consumer Series

*Your email address will not be displayed publicly. Emails are used for notification purposes only.*